manualshive.com logo in svg

Toyota C-HR2018, Owner'S Manual, Page: 106 / 516

Share
Download
Toyota C-HR2018 Owner'S Manual Download Page 106

106

3-2. Opening, closing and locking the doors

C-HR_OM_USA_OM10526U

Vehicles with a smart key system

Locks all the doors

Check that the door is securely
locked.

Unlocks the door

Pressing the button unlocks the
driver’s door. 
Pressing the button again within
3 seconds unlocks the other
doors.
Press and hold to open the windows

*

*

: These settings must be customized at your Toyota dealer.

◆

Key

Turning the key operates the doors as follows: 

Vehicles without a smart key system

Locks all the doors

Turn and hold to close the win-
dows

*

Unlocks the door

Turning the key unlocks the
driver’s door. Turning the key
again unlocks the other doors.
Turn and hold to open the win-
dows

*

*

: These settings must be customized at your Toyota dealer.

Vehicles with a smart key system

The doors can also be locked and unlocked with the mechanical key.
(

→

P. 436)

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Reviews:

No comments