Toyota C-HR 2017, Owner'S Manual

Page: 73 / 292

73
3. OTHER SETTINGS
BASIC
F
UNC
TION
2
C-HR_Navi_USA_OM10581U_17CY
■
EDITING THE LOCATION
1
Select “Location” .
2
Scroll the map to the desired point
(

P.200) and select “Enter” .
■
EDITING PHONE NUMBER
1
Select “Phone #” .
2
Enter the phone number and select
“OK” .
1
Display the vehicle settings screen.
(

P.70)
2
Select “Valet Mode” .
3
Enter the 4-digit personal code and se-
lect
“OK” .
4
Enter the same 4-digit personal code
again and select
“OK” .
 The system will request that you input the
security code again to confirm that you
remember it correctly.
VALET MODE
The security system can be set to on
by entering a security code (4-digit
number).
When set to on, the system will be-
come inoperative once the electrical
power source is disconnected until the
security code is entered.
SETTING THE VALET MODE
 When valet mode activates, the system
stops and a security code (4-digit num-
ber) standby screen is displayed.
(

P.74)
INFORMATION
●
If the 4-digit personal code is forgotten,
please contact your Toyota dealer.