Toyota BZ4X 2023, Owner'S Manual

Page: 329 / 628

329
5-4. Using the driving support systems
Owners Manual_USA_M42C01_en
5
Dr
iv
ing
Use the meter control switches
to enable/disable the RCD func-
tion. (

P.156)
1
Press or to select .
2
Press or to select
“RCD” and then press .
When the RCD function is disabled,
the driving assist information indi-
cator (

P.149) illuminates. At this
time, the RCD indicator and “Rear
Camera Detection OFF” will be dis-
played on the multi-information dis-
play.
If the rear camera detection
function detects a pedestrian in
the detection area, the buzzer
and pedestrian detection will
operate as follows:
If a pedestrian is detected in
area
Buzzer: Sounds repeatedly
Pedestrian detection icon:
Blinks
If a pedestrian is detected in
area
Buzzer (When the vehicle is
stationary): Sounds 3 times
Buzzer (When the vehicle is
backing up, when a pedes-
trian approaches the rear of
the vehicle): Sounds repeat-
edly
Pedestrian detection icon:
Blinks
If the system determines that
your vehicle may collide with
a pedestrian in area
Buzzer: Sounds repeatedly
Pedestrian detection icon:
Blinks
■ The rear camera detection func-
tion is operational when
● The power switch is in ON.
● RCD function is on.
● The shift position is in R.
● Advanced Park is not operating.
■ Setting the buzzer volume
The buzzer volume can be adjusted
on the multi-information display.
(

P.319)
Use the meter control switches to
change settings. (

P.156)
■ Muting a buzzer temporarily
When an object is detected, the
temporary mute switch is displayed
on the multimedia display system.
Select
to mute a buzzer of the
Turning the RCD function
on/off
When a pedestrian is
detected