Toyota 2014 Avalon Hybrid, Owner'S Manual, Page: 229 / 468

248
4-5. Using the driving support systems
AVALON_HV_U (OM41451U)
When the system is activated in the situations described above, there is also
a possibility that the seat belts will retract quickly and the brakes will be
applied with a force greater than normal. When the seat belt is locked in the
retracted position, stop the vehicle in a safe place, release the seat belt and
refasten it.
■
Obstacles not detected
The sensor cannot detect plastic obstacles such as traffic cones. There may
also be occasions when the sensor cannot detect pedestrians, animals, bicy-
cles, motorcycles, trees, or snowdrifts.
■
Situations in which the pre-collision system does not function properly
The system may not function effectively in situations such as the following:
●
On roads with sharp bends or uneven surfaces
●
If a vehicle suddenly moves in front of your vehicle, such as at an intersec-
tion
●
If a vehicle suddenly cuts in front of your vehicle, such as when overtaking
●
In inclement weather such as heavy rain, fog, snow or sand storms
●
When your vehicle is skidding such as the VSC system off
●
When your vehicle is steeply inclined
●
When the axis of the radar is out of adjustment
■
Automatic cancelation of the pre-collision system
When a malfunction occurs due to sensor contamination, etc. that results in
the sensors being unable to detect obstacles, the pre-collision system will be
automatically disabled. In this case, the system will not activate even if there
is a collision possibility.
■
When there is a malfunction in the system
“PCS” warning light will flash and warning messages will be displayed.
(
→
P. 414) Have the vehicle inspected by your Toyota dealer immediately.
■
Certification
FCC ID: HYQDNMWR004
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.