Toyota 2012 Yaris Hatchback, Owner'S Manual, Page: 271 / 365

292
4-3. Do-it-yourself maintenance
■
License plate light
Remove the cover.
Insert a properly sized screw-
driver into the hole of the cover,
and ply off the cover as shown in
the illustration.
To prevent damaging the vehicle,
wrap the screwdriver with a tape.
Remove the light bulb.
■
Lights other than the above
If the high mounted stoplight has burnt out, have it replaced by
your Toyota dealer.
■
LED high mounted stoplight
The high mounted stoplight consists of a number of LEDs. If any of the LEDs
burn out, take your vehicle to your Toyota dealer to have the light replaced.
■
Condensation build-up on the inside of the lens
Contact your Toyota dealer for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
●
Large drops of water have built up on the inside of the lens.
●
Water has built up inside the headlight.
■
When replacing light bulbs
→
P. 284