Toyota 2007 Land Cruiser Owner'S Manual Download Page 262

Page: 262 / 373

249

7. “TUBELESS” or “TUBE TYPE”

—

A tubeless tire does not have a

tube inside the tire and air is direct-
ly filled in the tire. A tube type tire
has a tube inside the tire and the
tube maintains the air pressure.

8. Uniform

tire

quality

grad-

ing—

For details, see “Uniform tire

quality grading” that follows.

9. Load limit at maximum cold tire

inflation pressure—

For details,

see “Checking and replacing tires”
on page 333.

10. Maximum cold tire inflation

pressure—

This means the pres-

sure  to  which  a  tire  may  be  in-
flated. For recommended cold tire
inflation  pressure,  see  “Tires”  on
page  354.

21A009a

This illustration indicates typical DOT
and Tire Identification Number (TIN).

1. “DOT”  symbol
2. Tire  Identification  Number  (TIN)
3. Tire  manufacturer’s  identification

mark

4. Tire size code
5. Manufacturer’s optional tire type

code (3 or 4 letters)

6. Manufacturing week
7. Manufacturing year

The  “DOT”  symbol  certifies  that  the
tire  conforms  to  applicable  Federal
Motor  Vehicle  Safety  Standards.

—DOT and Tire Identification
Number (TIN)

Summary of Contents for 2007 Land Cruiser






















































































































































































































































































































































































Search results

Summary of Contents for 2007 Land Cruiser

Reviews:

Toyota 2007 Land Cruiser, Owner'S Manual, Page: 262 / 373

Search results

Summary of Contents for 2007 Land Cruiser

Reviews: