Toyota 2007 Land Cruiser Owner'S Manual Download Page 146

Page: 146 / 373

133

If the indicator or buzzer comes on...

Do this.

(h)

Take vehicle to Toyota dealer immediately.

(i)

Take vehicle to Toyota dealer. If brake system warning light is also on, stop immedi-
ately and contact Toyota dealer.

(j)

Close all side doors and back door.

(k)

Adjust tire inflation pressure (including spare tire). If light remains on,
contact Toyota dealer.

(l)

Shift four

−

wheel drive control out of “N”.

(m)

Stop and check.

(n)

Take vehicle to Toyota dealer.

(o)

Key reminder buzzer

Remove key.

Summary of Contents for 2007 Land Cruiser






















































































































































































































































































































































































Search results

Summary of Contents for 2007 Land Cruiser

Reviews:

Toyota 2007 Land Cruiser, Owner'S Manual, Page: 146 / 373

Search results

Summary of Contents for 2007 Land Cruiser

Reviews: