Toyota 1996 Avalon, Owner'S Manual

Page: 80 / 202

79
FADE
This knob lets you adjust the balance be-
tween the front and rear speakers.
Type 1-1—Push “BAL/FADE” so that it
pops out of its retracted position. Pull out
the knob. Turn the knob to adjust the front/
rear balance. Push the knob back into its
retracted position.
Types 1-2 and 1-3—Move the “FADE”
ring around “PWR/VOL” to adjust the
front/rear balance.
MTL (Metal) display
Types 1-2 and 1-3
If a metal or chrome equivalent cassette
tape is put in the cassette player, the play-
er will automatically adapt to it and “MTL”
will appear on the display.
PROG (Program)
Push “PROG” to select the other side of
a cassette tape. The display indicates
which side is currently selected ( “
∧
” indi-
cates top side, “
∨
” indicates bottom side).
Auto-reverse feature—After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
PWR
.
VOL (Power
.
Volume)
Type 1-1 only
Push “PWR
.
VOL” to turn the audio sys-
tem on and off. Turn the “PWR/VOL” knob
to adjust the volume.
PWR/VOL (Power/Volume)
Types 1-2 and 1-3
Push “PWR/VOL” to turn the audio sys-
tem on and off. Turn the “PWR/VOL” knob
to adjust the volume.
Pull out and then turn “PWR/VOL” to ad-
just the balance between the right and left
speakers. Move “FADE” around “PWR/
VOL” to adjust the front/rear balance.
REW/FF (Rewind/Fast forward)
Push the “FF” side of the button to fast for-
ward a cassette tape. “FF” will appear on
the display. Push the “REW” side to re-
wind a tape. “REW” will appear on the dis-
play.
To stop the tape while it is fast forwarding,
push “FF” or “TAPE”; to stop the tape
while it is rewinding, push “REW” or
“TAPE”. The tape will immediately begin
to play.
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto-re-
verse feature.
R
.
M (Radio monitor)
Type 1-3 only
The radio monitor feature allows you to
listen to the radio while a cassette is being
rewound or fast forwarded.
Push “R
.
M”. “R
.
M” will appear on the dis-
play. Any time you are rewinding or fast
forwarding a cassette tape, the radio will
play the station that was set most recent-
ly. (You can not change the radio station
unless you switch out of the cassette play-
er function.)
Push “R
.
M” again to turn off the R
.
M fea-
ture.
RPT (Repeat)
Type 1-3 only
The repeat feature automatically replays
the current cassette.
Push “RPT” while the track is playing.
“RPT” will appear on the display. When
the track ends, it will automatically be re-
wound and replayed. This process will be
continued until you push the button again
to turn off the repeat feature.
There must be at least 3 seconds of blank
space between tracks in order for the re-
peat feature to work correctly.