Toyota 1996 Avalon Owner'S Manual Download Page 71 | Manualshive

Page: 71 / 202

Toyota 1996 Avalon Owner'S Manual Download Page 71

70

RESUMING THE PRESET SPEED

If the preset speed is cancelled by pulling
the control lever or by depressing the
brake pedal or clutch pedal, pushing the
lever up in the “RES/ACC” direction will
restore the speed set prior to cancellation.
However, once the vehicle speed falls be-
low about 40 km/h (25 mph), the preset
speed will not be resumed.
CRUISE CONTROL FAILURE WARNING

If the “CRUISE” indicator light in the in-
strument cluster flashes when using the
cruise control, press the “CRUISE ON-
OFF” button to turn the system off and
then press it again to turn it on.
If any of the following conditions then oc-
curs, there is some trouble in the cruise
control system.

The indicator light does not come on.

The indicator light flashes again.

The indicator light goes out after it
comes on.

If this is the case, contact your Toyota
dealer and have your vehicle inspected.

«
...
69
70
71
72
73
...
»

Summary of Contents for 1996 Avalon











































































































































































































Reviews:

No comments