Safety and Instruction Manual
9
Helpline: +44 (0) 333 220 6066
Fitting the smoking rack:
The smoking rack comprises of five pieces –
the tier, the plated shelf and three rack shelves.
1. First, attach the plated shelf, with the plate
facing towards you.
2. To attach the shelf hook it over the front
hooks on the tier, and under the back
hook.
3. Attach the required amount of rack
shelving following the above process.
4. Place your food onto the shelves.
5. Position the tier into the smoke pot, with
the plate sitting on top of the wood chip
pot.
Fitting the Digital Pressure Cooker &
Smoker lid:
1. To fit the lid, place on to base unit and
twist the handle to fit into in place.
2. Ensure that the safety release pin (on
the rear of the lid) and the condensation
pot are aligned on the back of the Digital
Pressure Cooker & Smoker base.
Functionality:
Connect power lead to the cooking pot, and
switch on at the wall.
Attach your transparent water catch pot to
the back of the unit, this will catch any excess
water from around the rim whilst cooking.
Continually press the menu button on the
control panel to select the required cooking
process. This will display the cooking time
for that function, if you wish to increase or
decrease your cooking time for the required
function, you can do this by pressing the Hours
and Minutes buttons, this will then increase or
decrease your cooking time in minutes.
Once you have selected your function, press
the start button, this will then go into warming
up mode, once the Digital Pressure Cooker &
Smoker has reached the set temperature the
cooking time will start.
If you wish to pre-set the Digital Pressure
Cooker & Smoker as to delay the start time,
you can do this once you have selected your
cooking function, now press the pre-set button,
then add time in hours or minutes by pressing
the Hour and Minute buttons, now press
Start, once the delay time has completed, the
warm up process will begin then your selected
cooking function will commence.
After your cooking process has finished the
cooker will automatically go into the keep warm
function. The cooker will stay at between 65-
70°C, if it goes over 70°C it will stop heating, if
it falls below 65°C it will start to heat back up
to 70°C.
To add ingredients to the Digital Pressure
Cooker & Smoker during cooking you must first
de-pressurise the cooker by turning the steam
release valve.
Open the lid to the Digital Pressure Cooker
& Smoker and add your extra ingredients. To
replace the lid pull out the safety lock override
pin to disable the pressure lock. Once the lid is
securely in position the safety lock override pin
will spring back into place.
Select you cooking function once again and
adjust to the remaining time.
