TOWA LCM1010, Operation Manual, Page: 276 / 552

8 INTELLIGENT SYSTEM
LCM 1010 Instruction Manual
8.2.5 Recipe Data Settings
Select the “Recipe Data Settings” option and the window shown below will be
displayed. Settings for recipe data and device parameters can be set and edited here.
|€>
n ! Speed j|
О
S L I T MAGA/I NF UN) C O U N T S t e p s
S L T T MAGAZI NE ( O U T ) C O U N T
? S t e p s
F RAMF E EE DF R E M P T Y FEED C O U N T
О St ep' s
FRAME L O A D ER P R E H EA T T IM E
D e e с
I /Е PH ТЕ MP SE T
D d e g O
L/F PH T EMP At ARM
O d e g C
L/F PH TE.MP O F E S E T ( I )
OsdegC
L / F PH TE.MP OF F SE T (R)
O d e g O
Molding Conditions
Product Type Data - Data not dependent on the
machine (Data that can be used in common with
other machines of the same type)
Fundamental device Data
Data hard-wired into the device
(Data that cannot be used in common with other
machines o f the same type)
Select the unit and the mode and the relevant data will t^egfisplayed.
Selecting the data on display will bring up the data entry .screen.
r?
____ '_________________
(1) “Show Recipe Name”
Displays the currently set recipe name.
(2) “ Switch Modules”
Press to switch between each o f the modules.
(3) “ Switch Units”
Press to switelbbetween each o f the units.
(4) “ Switch Modes”
Press to switch between each o f the modes.
(5) “Data Component”
Touch on the data component area and the data update
screen will be displayed. The data components that have
been updated will be shown in a different color.
(6) “M onitor Display”
Press to switch to the monitor display
Operating the Touch Panel
Click on Data Item
or Data Component
Data Input
“External File” button File operations can be carried out by transferring
registered data out to an external file.
“File” button File operations with the registered data
(Read, Save, Create New Files, Delete, Copy)
“Set and Save” button
Press to set the registered data to the machine and
save as a file.
“Return” button
Press to return to the Main Operations Screen
8-18
TZWA