TOWA LCM1010, Operation Manual, Page: 127 / 552

LCM 1010 Instruction Manual
About this Manual
This manual contains detailed information on the maintenance and inspection o f the TOWA
Compression-Molding System (LCM 1010).
This manual is composed o f the following sections.
1 GENERAL INFORMATION
This section contains the general machine outline, customer service information, and
the limited warranty.’ *
2 SAFETY '
This section contains important safety precaution information. Be sure that the
instructions in this section have been read and fully understood before performing
inspection tests or maintenance checks o f the machine.
3 OUTLINE OF MACHINE
This section outlines the general use, structure and movement o f the machine.
4 OPERATION SWITCHES AND BUTTONS
This section contains information regarding the operation panel and operation switches
and buttons.
5 PREPARATION
This section explains preparations necessary before running inspection test procedures.
6 CONVERSION KIT - REPLACEMENT AND ADJUSTMENT
This section contains information regarding the replacement mid adjustment o f the
conversion kit. «
. ■
* t %'Pi
о J
7 MANUAL OPERATION
This section explains procedures for manual operation o f individual sections.
8 INTELLIGENT SYSTEM
This section contains information regarding procedures and functions of the Intelligent
System which are necessary for the running inspection tests.
9 INSPECTION
This section contains information regarding necessary daily inspection o f the machine,
periodical inspection tests and their contents, and how often tests should be performed.
TCWA