Chapter 7
:
Using the Telephony Gateway
Release 16 STANDARD 1.3 October 2015
Touchstone TG1652G Telephony Gateway User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.
43
Use a pointed
non-metallic
object to press this button. The
Reset
button is recessed to
prevent accidental resets.
1. Reset button
2. Telephone 1
3. Telephone 2
4. USB
5. Ethernet (1 - 4)
6. Cable
7. Power
Resetting the Router to Factory Defaults
To reset the router to factory defaults, press and hold the
Reset
button on the back of the
Telephony Gateway for more than fifteen seconds. This restores the wireless setup
configuration and router configuration parameters to the factory defaults. You may need to
do this if a misconfiguration has locked out all access.
Booting from Battery
The TG1652G supports a “Boot from Battery” feature that allows the Telephony Gateway to
provide continued telephone service during power outages.
To start the TG1652G from its battery, follow these steps:
1. If a battery is already installed in the Telephony Gateway, remove it.
2. Re-insert the battery into the Telephony Gateway (see
Battery Installation and Removal
(page 17) for details).
