33
Gap between the Top Unit and Bowl Unit
(Perform monthly)
You can lift up the top unit
with the cleaning lift lever
and clean the gap between it
and the bowl unit.
Soft cloth
soaked in water
Toilet paper, etc.
(May cause damage)
1
Unplug the power plug.
(Page 15)
Switch the breaker on the distribution board to OFF.
(Asia, Oceania, Middle East)
2
Open the toilet seat and lid.
Cleaning
lift lever
3
Pull the cleaning lift lever until you
cannot pull it out any more, then
turn it downward.
(This raises the front side of the top unit about 25 mm)
4
Clean the gap.
Wipe with a soft cloth soaked in a diluted, neutral
kitchen detergent. Then, wipe it with a soft cloth
soaked in water so that no detergent remains.
CAUTION
When operating the cleaning
lift lever
Do not put a fi nger between the top
unit and bowl unit.
Do not use the product while the top
unit is lifted up.
Attention!
■
●
Do not directly spray cleaner and water.
■
●
Do not force the cleaning lift lever.
■
●
Do not force the toilet seat or lid to move
while the top unit is raised up.
5
Pull the cleaning lift lever until you
cannot pull it out any more, then
turn it upward.
Check that the cleaning lift lever is not exposed on
the side of the bowl unit.
6
Insert the power plug.
(Page 15)
Switch the breaker on the distribution board to ON.
(Asia, Oceania, Middle East)
Reference
Maintenance
Operation
Introduction
Maintenance
