Toto NEOREST 550, Instruction Manual, Page: 46 / 60

Tip
Tip
How to flush the NEOREST if there is a power failure
46
After flushing, turn the knob to near side 2
Turn the knob to far side for more than 2 seconds.
1
The water in the bowl is flushed.
The bowl refills with water .
Power or water failure
Power or water failure
Pour about 2gal.(8L) of water from a big bucket
into the center of the toilet bowl to induce flushing.
Be careful to not splash water from the toilet bowl.
Remove the cover panel on the right of the NEOREST, use
the manual flush knob
If the water level is too low in the toilet bowl after
the bucket is poured, add more water.
The water prevents odors from coming out of
the sewer pipes through the toilet bowl drain.
If the water supply fails, please the set auto flush feature to OFF.
Cover the floor with newspaper help
contain water splashing.
If the side panels are accidentally removed see page 15, 44, 45
See page 28, 29 for disabling auto flush
Power failure
Water failure
Far side Far side
Near side Near side
Clean panel
The NEOREST will not flush properly if there is power or water failure. In such a situation, follow these instruction.
1
2
Tip
Tip