Toto NEOREST 550, Instruction Manual, Page: 22 / 60

Tip
Tip
22
To disable the soft light feature
3
1
When the top unit receives the signal
from the remote control, it will give a
“Bik” sound.
3
2
Soft
[Current time]
Stop switch
Push
[Current time]
Tip
The setting has been changed.
The clock display resumes.
Close the remote control cover and
push again
Push on the remote control for 10
second or more
(Push it untill the display starts flashing)
Confirm this!
All fields on the
remote control
are flashing
The top unit will beep when it receives the
signal from the remote control.
Close the remote control cover and
push again
The setting has been changed.
The soft light is disabled. The
clock display resumes.
If you want to re-enable the soft light,
repeat the steps above.
When the top unit receives the signals from the remote
control, it will give out a “Bik” for the Low and High modes,
“Beep” for the Middle mode.
Each time the button is pushed, the illumination changes
modes. The modes rotate from Low to High to Medium.
2
Medium
Low High
Beep
Bik Bik
Open the cover
Open the remote control cover and
push
Tip