background image

ITEM  # 

52321 / LL2000

 

Submersible Waterfall Pump 

2000 Gallons Per Hour 

PACKAGE CONTENTS 

  WARNINGS AND CAUTIONS 

WARNING 

Risk  of  electrical  shock.  This  pump  is  supplied  with  a  grounding  conductor  and  grounding–type
attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly
grounded, grounding-type receptacle.

Do not exceed the voltage shown on the pump.

Always  disconnect  pump  from  the  power  source  before  beginning  any  maintenance  or  work  on  the
pump.

Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if
damage is found.

Do not remove the grounding pin from the power cord plug.

Risk  of  electrical  shock:  This  pump  has  not  been  investigated  for  use  in  swimming  pools  or  marine
areas.

CAUTION 

This pump has been evaluated for use with water only.

Use a proper power source as indicated on the pump label.

Keep the cord away from high temperatures or other heat sources.

Do not pump heated liquids.

Do not let the pump run dry.  Pump must be completely submerged for proper operation and cooling.

Operate in fresh water only.  Avoid heavily chlorinated water and water with high pH levels.

Do not lift the pump by its power cord.

Part 

Description 

Quantity 

Pump 

1 in. and 1-1/2 in. ID tubing 

adapter 

pump barrier bag 

Questions, problems, missing parts? 

Before returning 

to your retailer, call our customer service department at  
1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at [email protected].  Or visit our
website www.totalpond.com.

REMINDER 

CALL 1-888-412-6001 

BEFORE RETURNING TO STORE. 

B

Summary of Contents for LL2000






Reviews: