PRECAUTIONS
• Store the Tornado V5 e-cigarette and its accessories
away from children whilst not in use.
• Please only use the charging cable provided.
• Please dispose of dead batteries in accordance
with your country’s appropriate legislation.
• Do not charge the battery in a damp environment,
in temperatures under 0°C or above 45°C.
• Do not carry batteries in a pocket or bag with other
metallic objects.
WARRANTY
The Tornado V5 components contained in each kit
have a 28-day parts warranty with the exception
of the atomizer heads which are covered by our
Dead On Arrival warranty only. The USB cable
supplied has a 12-month warranty. If any parts are
found to be faulty within this time please contact
our customer service team, and we will arrange
for a replacement. We may require the goods to be
returned for further investigation.
USER GUIDE
Manufactured in China under the authority
of Pillbox38 UK Ltd, Stancliffe Street,
Blackburn, Lancashire, BB2 2QR.
UK: Tel 01254 692244 www.totallywicked-eliquid.co.uk
USA: Tel 1(888) 761-9425 www.totallywicked-eliquid.com
GER: Tel 01803 942533 www.totallywicked-eliquid.de
Filling the V5 BDC:
• Holding the tank vertical with the base
(A) uppermost unscrew the base from
the tank (C).
• Fill the tank up to but not beyond the
level of the internal tube as shown in (D).
• Refit the base (A) to the tank (C) and
tighten finger tight only.
• Invert the tank and set aside for 5
minutes to allow the e-liquid to fully soak
the atomizer head before use.
• Attach the V5 BDC Tank to the battery.
Using the Tornado V5:
Holding the mouthpiece to your mouth,
press the power button on the battery
and gently inhale on the device for 2 to 5
seconds while keeping the power button
depressed. Release the power when you
stop inhaling.
Replacing the Tornado V5 atomizer head:
• Remove the V5 BDC tank from the
battery.
• Holding the V5 BDC tank vertical with the
base uppermost, unscrew the base (A)
from the tank (C).
• The atomizer heads are a push fit.
Remove the old atomizer head (B) by
pulling it away from the base (A).
• Insert a new atomizer head and push it
firmly into the base (A).
• Refill the tank if necessary and refit the
base (A) to the tank (C).
Allow 5 minutes to allow the e-liquid to
fully soak the atomizer head before use.
• Attach the V5 BDC Tank to the battery.
PLEASE NOTE: The V5 mouthpiece is not
removable.
A
B
C
D
Battery Operation:
To turn the battery on or off click the power button 5 times within 2 seconds.
The Tornado battery has 2 modes of operation, regulated and unregulated power output.
Regulated output produces a constant output of 3.7V from fully charged to discharged.
Unregulated output produces a higher output of 4.2V which diminishes to 3.3V over the
period of discharge.
To toggle between the 2 modes, turn the battery off by clicking the power button 5
times, once off hold the power button for approximately 5 seconds, the power button
will flash white for regulated mode and orange for unregulated mode, press the power
button 5 times to turn the battery back on in the mode selected.
Charging:
To charge the battery, connect the supplied USB cable to a suitable power source such
as a computer or USB power adapter. The power button will light red until charging is
complete when the light will go out to indicate charging is complete.
Battery charge remaining:
The power button LED will show white if the charge remaining is 60% or more, the LED
will change to pale blue when below 60% charged. The LED will turn to dark blue when
there is 10% or less remaining charge. When fully discharged the LED will flash 20
times and shut down, the battery will require charging before further use.
The Tornado V5 can be used normally whilst being charged.
Power
button
USB Port
Regulated mode
Unregulated mode
100% to 60% charged
60% to 10% charged
Less than 10% charged
