Solar Motion Light
User Manual
Please read and follow all instructions to operate.
Save this manual for future reference.
Installation
Notice
1.5W Plus
Light shines front and back
1. This is a solar powered lamp, please install it in a location where can
get enough sunshine.
2. Please note the lighting time depends on sunshine duration & weather.
3. The lamp will light up when the environmental brightness is less than 30lux.
4. Lamp need to be installed at least 13 feet from the ground.
5. The lamp is equipped with a internal lithium battery, please do not replace it
by yourself, and don't dispose it with household garbage to avoid explosion.
1. Use the card to measure hole position correctly and drill 2 holes.
2. Fix 2 expansion plugs into the holes.
3. Fix a screw to the lower expansion plug with a spare space, insert the
notch onto the screw.
4. Straighten the whole lamp and fasten the upper screw.
5. Press the button to adjust to demanded working mode.
For more information, go to: www.totalleds.com
