-PROG- key (indication N°6): increases the current parameter in the active menu
-"teletext" key (indication N°2):
stores
to memory all current settings, for example you can store the
USB input selection when you use the reclocker as a music server.
New available keys from software version V3.5, to select one Totaldac equipment among two or
three using a single remote control:
--number "7": selects the remote control receiver of the server only
--number "8": selects the remote control receiver of the reclocker only
--number "9": selects the remote control receiver of the DAC only
--number "6": selects the remote control receiver of all Totaldac products
Available menus:
PHASE
: can invert the absolute phase of the signal, set to "NORMAL" by default.
EARTH
: when "CONNECTED" is selected the signal ground is connected to the earth. When
"UNCONNECTED" is selected the signal ground and the earth are isolated. Choose the best
configuration to get the best silence from your amplifier or the best sound when listening to music.
DISPLAY
: when "ON" is selected the display is always switched on, when "OFF" is selected the display
is switched off 10 seconds after the last remote control action.
DSD --> PCM
: for the reclocker and d1-server, set ON or OFF the DSD (DoP) to PCM 176KHz/24
conversion.
Set ON if the DAC which follows the reclocker/server is not DSD compatible.
Set OFF if the DAC which follows the reclocker/server is DSD compatible. The reclocker/server volume
control must be set to 0dB to allow to pass the DSD in DoP format.
Note: to use as a music server please select the USB input and save the configuration so it will be
automatically on USB input for next power ON.
10
