TRVR Audio Mixer
Page 6 of 12
2.
Introduction
2.1.
Thank You
Congratulations on your purchase of a Total Recall VR Audio Mixer. Thank you.
Total Recall VR Audio Mixer is a low noise 2-channel audio mixer designed to work
best with Total Recall VR audio logging and call recording systems. However, it can be
used with other equipment as well where it is necessary to combine two audio sources
into a single audio source.
2.2.
About This Guide
This guide contains information intended to get you working with your new Total Recall
VR Audio Mixer as quickly as possible.
2.3.
What is Total Recall VR Audio Mixer?
Total Recall VR Audio Mixer is a low noise 2-channel audio mixer that can combine
two audio sources into one.
You can use Total Recall VR Audio Mixer to:
Combine (mix) a stereo audio signals into a mono signal.
Combine (mix) the transmit (Tx) and receive (Rx) audio signal of a 2-way radio,
repeater or base station.
Combine (mix) any two line level audio signals into a single line level signal.
Specification:
3.5mm TS and RJ12 connector for each input
Signal level control (gain) for each input
