Maintenance
Page 38
RES-403
[X] As of October 2005:
With ROPEX visualization software only.
11
Maintenance
The controller requires no special maintenance.
Regular inspection and/or tightening of the terminals –
including the terminals for the winding connections on
the impulse transformer – is recommended. Dust depo-
sits on the controller can be removed with dry com-
pressed air.
Measuring impuse
duration
[X]
Measuring impulse length: 1,7ms
„Temp. OK“ signal
(as of October 2005:
With MOD 46 only)
[X]
Tolerance band: -10K…+10K
Temperature
diagnosis
[X]
Temperature diagnosis: OFF
Heatup timeout
[X]
Heatup timeout: OFF
