TOSINGRAF Mamo Megastar, Owner'S Manual

Page: 23 / 35

RE V. 2.1 MEg a sta R 23
1.5 CONVENTIONS
1.5.1 d
efinitions
Machine
: Indicates the machine specified in the machine identification data and whose serial number is shown on the cover.
Frame
: structure of the machine
Qualified Personnel
: people who for their expertise and experience as well as knowledge of relevant standards, safety regulations and conditions
of service, are able to recognize and avoid all possible danger to persons and any possible damage to the part and the machine .
The descriptions of direction, sense and position (right and left of the machine) refer to the position of the operator in front of the machine.
1.5.2 t
yPograPhiC Conventions
1 (number of generic example): symbolic representation of a control or signaling
A (generic letter of example): symbolic representation of a part of the machine
1.6 USED INDICATIONS
The manufacturer has used its experience and has obtained the necessary expertise to make to the machine, to which the present ma-
nual, the safety work conditions for the operators.
A careful reading of the instructions contained in the various sections of the Handbook is the first essential element of security:
No operation of any type must be carried out on the machine without the operator having thorough reading of the section concerned.
Each operator must ensure to fully understand the contents of the instructions of this manual before performing any operation, and in
particular before performing maintenance.
The hazard included those procedures where non-compliance can produce injuries.
WARNING! Other warnings found on the machine, or adhesives, are reproduced in the corresponding section.
Abrasions or removal causes the mismatch in this manual and are the responsibility of the user.
1.7 MANIFACTURER’S DATA
Tosingraf s.r.l.
Via Istria, 23
36027 Rosà (VI) – Italy
Tel.: +39 0424/898312 - Fax: +39 0424/539134
e-mail: info@mamosrl.com - www.mamosrl.com
1.8 MACHINE IDENTIFICATION DATA
The machine is identified by the following specifications:
• model MEGASTAR
• identification number __________
• voltage, frequency and maximum power consumption: 230V - 50/60Hz - 750W
• year of construction: see identification number
See label on the machine reproduced below:
The plate is located in the rear of the machine.
Modello - Type Tensione - Tension (V)
Peso - Weight (kg)
Anno - Year
Matricola - Serial number
Potenza - Power (kW)
ENG
Ch a P t ER 1: IN t ROduC t ION