Lock 210/250
Quick Start Guide
Copyright © Tosibox Oy, 2020
Matching the Lock with the Key
Deploying into Broadband Networks
1. Connect an Internet-connected ethernet cable
to the Lock’s WAN port.
2. Plug the devices into the Lock’s LAN ports
(LAN 1-3). If the devices have static IP
addresses, please see
Deploying the Lock
in the TOSIBOX
®
user manual.
1
2a
TOSIBOX
®
Lock 210/250
TOSIBOX
®
Key
Power source Kit
WAN: Internet/xDSL router
VPN tunnel through Internet
PC
TOSIBOX
®
Mobile
Client
TOSIBOX
®
Key
W
A
N
L
A
N
Firewall
TOSIBOX
®
Lock
HMI
PLC
Camera
PC
1. Connect the operating voltage of 12-48 V DC to the Lock and wait for 1 minute. In case you have a
product version with Power Source kit, use the conversion cable. It converts the AC adapter’s coaxial
connector output to stripped wires that are needed to power the Lock 210/250. Follow the polarity
symbols in the front panel. Use + and - terminals to power the device.
2. Insert the Key into the USB port of the Lock. When the LED on the Key turns off, (after approx.
10 seconds) the matching is complete, and you can remove the Key from the USB port.
3. Go to
2a
if deploying into broadband networks (ethernet) or
2b
if deploying into mobile
networks. If deploying Locks as DHCP client into existing networks, please see the TOSIBOX
®
user manual.
USB Connection
