Toshiba Z30 Page 100 User Manual Download | Manualshive

Page: 100 / 149

background image

The TOSHIBA PC Health Monitor software does not extend or modify
TOSHIBA obligations under its standard limited warranty in any way.
TOSHIBA standard limited warranty terms and limitations apply.

Starting the TOSHIBA PC Health Monitor

The TOSHIBA PC Health Monitor can be opened by clicking

PC Health

Monitor

under

TOSHIBA

group in the Apps view.

The TOSHIBA PC Health Monitor main screen is displayed.
This utility might be disabled by default on your computer. You can enable
it by clicking

Please click here to enable TOSHIBA PC Health Monitor

.

The "PC Health Monitor Software Notice & Acceptance" screen is
displayed. Carefully read the information displayed. Selecting

ACCEPT

and clicking

OK

enables the program. By enabling the TOSHIBA PC

Health Monitor software, you agree with these terms and conditions and to
the use and sharing of the collected information. Once the program is
enabled, the TOSHIBA PC Health Monitor screen is displayed, and the
program begins monitoring system functions and collecting information.

A message is displayed if any changes which might interfere with the
operation of the program are detected. Follow the instructions displayed
on-screen in the message.

Using the Hard Disk Drive (HDD) Protection

Some models have the function for reducing the risk of damage on the
HDD.
Using an acceleration sensor built into the computer, HDD Protection
detects vibration shocks and similar signs of movement of the computer,
and automatically moves the HDD head to a safe position to reduce the
risk of damage that could be caused by head-to-disk contact.

HDD Protection function does not guarantee that the HDD will not be
damaged.
During audio/video playback, when the computer detects a shock or
vibration and the HDD's head is parked, the playback might be
temporarily interrupted.
HDD Protection cannot be used in models that are equipped with
SSD.

When vibration is detected, a notification is displayed on the screen, and
the icon in the Taskbar changes to the protection state. This message is
displayed until the

OK

button is pressed or 30 seconds pass. When

vibration subsides, the icon returns to the normal state.

User's Manual

5-13

«
...
98
99
100
101
102
...
»

Summary of Contents for Z30






















































































































































Reviews:

No comments

Related manuals for Z30

VERSA SX HARD DISK DRIVE

Brand: NEC Pages: 6

Brand: NEC Pages: 46

Brand: NEC Pages: 96

Brand: IBM Pages: 2

Brand: IBM Pages: 5

Brand: IBM Pages: 6

600E - ThinkPad 2645 - PII 400 MHz

Brand: IBM Pages: 222

AcerNote Light 370

Brand: Acer Pages: 16

Brand: Acer Pages: 28

Acer TravelMate 3300 Series

Brand: Acer Pages: 75

Brand: Acer Pages: 88

AcerNote Light 370

Brand: Acer Pages: 3

Aspire 1360 Series

Brand: Acer Pages: 143

Brand: Acer Pages: 11

Brand: Acer Pages: 79

AS7315-302G25Mn

Brand: Acer Pages: 200

AS4810T- 354G32Mn LX.PBA0X.075

Brand: Acer Pages: 148

Brand: Acer Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands