Volume cannot be adjusted during Windows Setup.
Slide the computer's power switch to power on.
Figure 1-4 Turning on the power
1
1. Power switch
Starting up for the first time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
When it is displayed, be sure to read the Software License Terms
carefully.
Turning off the power
The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.
Shut Down Mode
When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.
1.
If you have entered data, either save it to the Solid State Drive or to
other storage media.
Never turn off the power while an application is running. Doing so
could cause loss of data.
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause
data loss.
In any emergency case, you can also slide the power switch for about
six seconds to force power off.
2.
Tap
Start
.
TOSHIBA WT200
User's Manual
1-5
