TMPM4K Group(1)
Product Inromation
2018-09-18
68 / 89
Rev. 2.1
2.8.5. DMA request
The following table shows the DMA request in the 12-bit ADC.
Table 2.45 ADC DMA request
Unit
Request
Signal name
Trigger
selector
DMA request channel
Single
transfer
Burst
transfer
A
General purpose trigger DMA request ADATRG_DMAREQ
[TSEL0CR0]
<INSEL0>
18
-
Single conversion DMA request
ADASGL_DMAREQ
-
Continuous conversion DMA request ADACNT_DMAREQ
-
Note:
: Available, - : N/A
2.8.6. Other connection
In the 12-bit ADC, there is a signal connected with the peripheral function inside in addition to this as shown in
the following table.
"-" in the table does not have an applicable function.
Table 2.46 ADC inside connection: output
Unit
Function output
Trigger
selector
Output destination
Signal name
Signal name
A
General purpose trigger interrupt
INTADATRG
[TSEL0CR9]
<INSEL38>
T32A ch5
Timer A
-
Single conversion interrupt
INTADASGL
Continuous conversion interrupt
INTADACNT
Monitor function 0 interrupt
INTADACP0
Monitor function 1 interrupt
INTADACP1
Monitor function 0 output for PMD
protect function
ADACP0L_N
-
A-PMD ch0
ADACMP0L_N
-
A-PMD ch1
ADACMP0L_N
Monitor function 1 output for PMD
protect function
ADACP1L_N
-
A-PMD ch0
ADACMP1L_N
-
A-PMD ch1
ADACMP1L_N
PMD trigger interrupt A
INTADAPDA
-
A-PMD/
A-VE+
INTADAPDA
PMD trigger interrupt B
INTADAPDB
-
INTADAPDB
PMD trigger interrupt C
INTADAPDC
-
INTADAPDC
PMD trigger interrupt D
INTADAPDD
-
INTADAPDD
priority ADC interrupt
INTADAPFLG
-
A-PMD
INTADAPFLG
AD conversion flag
ADABUSY
-
ADABUSY
Conversion result store register
VADAREG0
-
A-VE+
VADAREG0
VADAREG1
-
VADAREG1
VADAREG2
-
VADAREG2
VADAREG3
-
VADAREG3