1-6
TLPB2 Service Manual Rev. 2.0
3-4. Lamp Housing and Exhaust Fan
Step
Figure
Explanation
1
Remove two screws that secure the lamp connector
(M2.6 x 6).
Screw : type [M-1]
2
Pull connector upward to remove.
3
Remove three screws that secure the lamp housing and fan
to the cabinet (M2.6 x 6).
Screw : type [M-3]
Remove one screw that secures the lamp housing to the
optical engine (M2.6 x 6). (Green marked)
Screw : type [M-1]
4
Pull up the lamp housing upward.
5
The lamp housing and exhaust fan are removed together.
