Toshiba Teli CSGS15BC23, Instruction Manual

Page: 9 / 28

D4153659A 1
1. Overview
This GiantDragon B/W series is an integrated-(one-body)-type monochrome camera that adopts all pixel data
readout inter line CCD. There are 4 models according to the sensor type. These are CSGV90BC3 (VGA),
CSGX36BC3 (XGA), CSGS20BC2 (SXGA: 1/2 type), CSGU15BC18 (UXGA), and CSGS15BC23 (SXGA: 2/3
type). For video output, the Gigabit Ethernet
®*
interface standard “IEEE802.3ab” is adopted for high transfer rate,
and it is easy to integrate into industrial equipment.
* Ethernet
®
is a registered trademark of XEROX Corporation.
2. Features
!
High frame rate and high resolution
Supported high frame rate CSGV90BC3 (90fps/VGA), CSGX36BC3 (36fps/XGA), CSGS20BC2
(20fps/SXGA: 1/2 type), CSGU15BC18 (15fps/UXGA), and CSGS15BC23 (15fps/SXGA: 2/3 type).
!
All pixel readout
All pixel signals (in the effective area) are output in one frame processing.
!
Full frame shutter
Since all pixels are output even by shutter operation, high resolution can be achieved, without deteriorating
the vertical resolution.
!
Square grids
The CCD pixels arrayed in square grids facilitates computation for image processing.
!
Gigabit Ethernet interface
Performs video output and camera control via the Gigabit Ethernet standard IEEE802.3ab interface. Data
transfer is at 1Gbps that can output uncompressed video data of high frame rate.
!
GigEVision Ver 1.0 conformity
This product is based on GigEVision Camera Interface Standard for Machine Vision Ver 1.0 that is industrial
camera standard. Therefore, control of this camera is easy.
!
GenICam Ver 1.0 conformity
This product is based on GenICam Generic Interface for Cameras Ver 1.0 that is industrial camera standard.
Therefore, control of this camera is easy.
!
Binning mode
This mode realizes high-speed frame rate by adding two vertical lines or four vertical lines.