42
Getting Started
Charging the main battery
Charging the main battery
Before using the battery to power the computer, you must
charge the battery.
To charge the battery, leave the computer plugged into an
AC power source with the computer turned off until the
battery light glows white. After that, the battery will be
completely charged and ready to power the computer.
Battery life and charge time may vary depending on the
applications power management settings, and features
used.
Using the computer for the first time
The computer is now ready for you to turn it on and begin
using it, see
“Exploring Your Computer’s Features” on
.
When opening or closing the display panel, place one
hand on the palm rest to hold the computer in place and
use the other hand to slowly open or close the display
panel.
To avoid damaging the display panel, do not force it
beyond the point where it moves easily and never lift the
computer by the display panel.
Do not press or push on the display panel and be careful
to remove any pens or other objects from the keyboard
area before closing the display panel.
Initial setup
After turning on your computer for the first time, follow the
on-screen instructions on each screen in order to properly
install the operating system and begin using your computer.
When you turn on the computer for the first time, do not
turn off the power again until the operating system has
loaded completely.
NOTE
NOTE
