manualshive.com logo in svg

Toshiba Tecra S2, User Manual

Share
Download
Toshiba Tecra S2 User Manual Download Page 82

82

Getting Started

Using an external keyboard

5.375 x 8.375 ver 2.3

Using an external keyboard

If you prefer to use a full-size keyboard, you can attach one to 
your computer. The computer’s USB ports support any USB-
compatible keyboard.

Using a mouse

You may want to use a mouse instead of the computer’s built-
in TouchPad. You can use a USB-compatible mouse.

TECHNICAL NOTE: With a USB mouse, you can choose to 
have the TouchPad active at the same time.

After logging on to your system, the mouse cursor may move 
to the upper-right side of the screen. If this occurs, push the 

Esc

 or Windows key to return it to its original position.

Connecting a USB mouse

To connect a USB mouse, connect the mouse cable to the 
USB port on the computer. Once connected, the mouse is 
ready to use. 

NOTE

Summary of Contents for Tecra S2











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands