Toshiba Tecra M9 Series User Manual Download

Page: 190 / 261

190

If Something Goes Wrong

Resolving a hardware conflict

Nothing happens when you press the keys on the external
keyboard.

You may have plugged the external keyboard in while the computer
was turned on. Using the computer’s TouchPad, click

Start

, then

either

Shut Down

Turn off computer

, and then

Restart the

Computer

. The computer will restart and recognize the device.

Display problems

Here are some typical display problems and their solutions:

The screen is blank.

Display Auto Off may have gone into effect. Press any key to
activate the screen.

You may have activated the instant password feature by pressing

and

simultaneously. If you have registered a password, press

any key, type the password and press

Enter

. If no password is

registered, press any key. The screen reactivates and allows you to
continue working.

If you are using the built-in screen, make sure the display priority is
not set for an external monitor. To do this, press

and

simultaneously (once). If this does not correct the problem, press

and

simultaneously again to return the display priority to its

previous setting.

HINT: Holding the Fn key and pressing the F5 key several times will
advance you through the display options.

If you are using an external monitor:

❖

Check that the monitor is turned on.

❖

Check that the monitor’s power cord/cable is firmly plugged
into a working power outlet.

❖

Check that the cable connecting the external monitor to the
computer is firmly attached.

❖

Try adjusting the contrast and brightness controls on the
external monitor.

❖

Press

and

simultaneously to make sure the display

priority is not set for the built-in screen.

Summary of Contents for Tecra M9 Series






































































































































































































































































Search results

Summary of Contents for Tecra M9 Series

Reviews:

Related manuals for Tecra M9 Series

Brands by name

Popular brands

Toshiba Tecra M9 Series, User Manual

Search results

Summary of Contents for Tecra M9 Series

Reviews:

Related manuals for Tecra M9 Series

Brands by name

Popular brands