Toshiba Tecra M9 Series Page 148 User Manual Download

Page: 148 / 261

148

Utilities

Fn-esse®

Fn-esse

Desktop shortcuts and Toshiba’s Fn-esse program provide quick
ways to open programs, documents, and folders from within any
Windows

-based program without using the Start menu. For more

information on creating desktop shortcuts, refer to the operating
system documentation that came with your computer.

This section describes how to use the Fn-esse program to quickly
access your programs and files.

With Fn-esse, you can assign an

key combination to:

❖

Open a Windows

operating system program

❖

Open a file in its associated program

❖

Display a customized folder of programs and/or files from
which to choose

Fn-esse also has several keys, known as hot keys, that perform
preassigned operations. For more information, see

“Hot Keys” on

page 213

You can assign any key that is not associated with a hot key or a
keyboard overlay.

Starting Fn-esse

Click

Start

All

Programs

Toshiba

Utilities

, and then

Fn-esse

, or

click the

Hotkey Assignment

icon in the

Optimize

tab of

TOSHIBA Assist

The Fn-esse keyboard appears.

(Sample Image) Fn-esse screen

The keys are color-coded as follows:

❖

Available keys are dark gray with white letters.

❖

Assigned keys and keys associated with a popup list are shown
on the Fn-esse keyboard in the selected color.

❖

Unavailable keys are light gray.

Summary of Contents for Tecra M9 Series






































































































































































































































































Search results

Summary of Contents for Tecra M9 Series

Reviews:

Related manuals for Tecra M9 Series

Brands by name

Popular brands

Toshiba Tecra M9 Series, User Manual

Search results

Summary of Contents for Tecra M9 Series

Reviews:

Related manuals for Tecra M9 Series

Brands by name

Popular brands