Toshiba TE2300 Series User Manual Download Page 124

Page: 124 / 248

124

Mobile Computing

Conserving power

5.375 x 8.375 ver 2.3

Power usage modes in Windows XP

In Windows

XP, you can choose from predefined power

usage modes or select your own combination of power
management options. To do this:

Click

Start

Control Panel

, then

Performance and

Maintenance

Click the

Toshiba

Power Saver

icon.

Open the Power Save Modes tab and set your options.

For more information, see

“TOSHIBA Power Saver utility”

on page 172

Using a hot key to set the power usage mode

You may use a hot key to set the power usage mode.

To set the power usage mode:

Press

and

simultaneously to display the power usage

pop-up window.

Sample Power usage mode pop-up window

While continuing to press

, press

until you select the

desired power usage mode.

The power usage modes under battery power are:
Long Life, Normal, High Power, DVD-Playback,
Presentation, and Super Long Life.

The power usage mode under AC power is Full Power only.

Summary of Contents for TE2300 Series

























































































































































































































































Search results

Summary of Contents for TE2300 Series

Reviews:

Related manuals for TE2300 Series

Brands by name

Popular brands

Toshiba TE2300 Series, User Manual

Search results

Summary of Contents for TE2300 Series

Reviews:

Related manuals for TE2300 Series

Brands by name

Popular brands