Toshiba TE2100 Series User Manual Download Page 97

Page: 97 / 268

Learning the Basics

Caring for your computer

Make sure there is no way for a potential thief to slip the cable
off the object.

Pass the locking end through the loop.

Slide the PC Card lock (located underneath the PC Card slots)
to secure your PC Cards in place.

Insert the cable’s locking end into the security lock slot on the
computer, then give the key a quarter turn and remove it.

The computer is now securely locked. Also, any device in the
PC Card slots are now secured to the computer by the locking
mechanism.

Locking the computer

Caring for your computer

This section gives tips on cleaning and moving your computer. For
information about taking care of your computer’s battery, see

“Running the computer on battery power” on page 110

Summary of Contents for TE2100 Series













































































































































































































































































Search results

Summary of Contents for TE2100 Series

Reviews:

Related manuals for TE2100 Series

Brands by name

Popular brands

Toshiba TE2100 Series, User Manual

Search results

Summary of Contents for TE2100 Series

Reviews:

Related manuals for TE2100 Series

Brands by name

Popular brands