INSTALLATION MANUAL
AIR CONDITIONER
Spigot flange for Duct
Model: TCB-SF56C6B
P
E, TCB-SF80C6B
P
E,
TCB-SF160C6B
P
E
Thank you for purchasing the “Spigot
flange for Duct” for TOSHIBA air
conditioner. Before starting the
installation work, please read this manual
carefully and install the product properly.
1
English
PRECAUTIONS FOR SAFETY
Please read “PRECAUTIONS FOR SAFETY” described in the Installation and Owner’s Manual of indoor unit and
outdoor unit and
install
the product properly.
1. Adaptation model
2. Accessories
Below parts are included.
Model name
Adaptation model
TCB-SF56C6B
P
E
RAV-SM40
✽
BT
✽
RAV-SM45
✽
BT
✽
RAV-SM56
✽
BT
✽
MMD-AP007
✽
BH
✽
MMD-AP009
✽
BH
✽
MMD-AP012
✽
BH
✽
MMD-AP015
✽
BH
✽
MMD-AP018
✽
BH
✽
TCB-SF80C6B
P
E
R
AV-SM80
✽
BT
✽
MMD-AP024
✽
BH
✽
MMD-AP027
✽
BH
✽
MMD-AP030
✽
BH
✽
TCB-SF160C6B
P
E
RAV-SM110
✽
BT
✽
RAV-SM140
✽
BT
✽
RAV-SM160
✽
BT
✽
MMD-AP036
✽
BH
✽
MMD-AP048
✽
BH
✽
MMD-AP056
✽
BH
✽
Model name
Parts name
Form
Quantity
TCB-SF56C6B
P
E
Spigot flange for duct
1
Installation manual
This manual
1
TCB-SF80C6B
P
E
Spigot flange for duct
1
Installation manual
This manual
1
TCB-SF160C6B
P
E
Spigot flange for duct
1
Installation manual
This manual
1
3. How to install
Remove screws on square flange for duct of indoor unit and attach the spigot flange for duct with the screws.
4.External static pressure settings
REQUIREMENT
• When you use this air conditioner for the first time, it takes
approx. 5 minutes until the remote controller becomes
available after power-on. This is normal.
<When power is turned on for the first time after
installation>
It takes
approx. 5 minutes
until the remote controller
becomes available.
<When power is turned on for the second (or later) time>
It takes
approx. 1 minute
until the remote controller becomes
available.
• Normal settings were made when the indoor unit was shipped
from factory.
Change the indoor unit settings as required.
• Use the wired remote controller to change the settings.
* The settings cannot be changed using the wireless
remote controller, sub remote controller, or remote-
controller-less system (for central remote controller
only). Therefore, install the wired remote controller to
change the settings.
Spigot flange for duct:
TCB-SF56C6B
P
E
Spigot flange for duct:
TCB-SF80C6B
P
E
Spigot flange for duct:
TCB-SF160C6B
P
E
Remove the square
flange for duct.
Remove the screws.
(10 parts)
Remove the square
flange for duct.
Remove the screws.
(12 parts)
Remove the square
flange for duct.
Remove the screws.
(16 parts)
Attach the spigot
flange for duct.
screws
(10 parts)
Attach the spigot
flange for duct.
screws
(12 parts)
Attach the spigot
flange for duct.
screws
(16 parts)
Power on
“SETTING”
flashes
“SETTING”
goes out
Remote
controller is
available
Approx. 5 minutes
Power on
“SETTING”
flashes
“SETTING”
goes out
Remote
controller is
available
Approx. 1 minute
EH99535901-1_01EN.fm Page 1 Thursday, September 27, 2012 4:19 PM
1115493501- 1
MMD-AP0
18
✽
H
✽
MMD-AP02
4
✽
H
✽
MMD-AP0
27
✽
H
✽
MMD-AP036
✽
H
✽
MMD-AP048
✽
H
✽
MMD-AP056
✽
H
✽
