Central remote controller
Owner’s Manual
62
-EN
Check history
Notice history
Contact information
Checking the Check / Notice history (Check/Notice history)
1
In the “Settings Menu” screen, select “Check/Notice history”
and then press [
] (Confirm).
The “Admin. Password Entry” screen is displayed.
2
Enter a password using [<], [
∧
], [
∨
], and [>], and then press
[
] (Confirm).
The “Check/Notice history” screen is displayed.
3
Select an item using [
∧
] and [
∨
], and then press [ ] (Confirm).
The screen corresponding to the selected item is displayed.
The Check history of the past 300 Check codes is displayed.
• Change the page using [
∧
] and [
∨
].
• If you press [
] (Return), the “Check/Notice history” screen is
displayed again.
• The Check code for the occurring check is blinking.
3/4-digit code
***: Air conditioner (LC/VRF/Air to air heat exchanger/General purpose
equipment control interface)
3***: Air to Water Heat Pump
The Notice history of the past 300 Notice codes is displayed.
• Change the page using [
∧
] and [
∨
].
• If you press [
] (Return), the “Check/Notice history” screen is
displayed again.
• The Notice code for the occurring notice is blinking.
The Contact Information is displayed.
• If you press [
] (Return), the “Check/Notice history” screen is
displayed again.
• For information about how to register contact information, refer to
the installation manual.
