Central remote controller
Owner’s Manual
51
-EN
Energy-saving operation that limits the output of the air conditioner is possible.
Depending on the range of the area to be set, display the “Control” screen of All or Zone and perform the operation.
●
NOTE
Since the output of the air conditioners is limited in energy saving operation, they may not cool (warm) strongly.
Limit the output of the air conditioner (Energy saving operation)
1
Display the “Control” screen of All or Zone. (P.15)
2
Press [ ] (Control).
The “Menu” screen is displayed.
3
Press [
∧
] [
∨
] to select “Energy saving operation”, then press
[
] (Confirm).
The “Energy saving operation” screen is displayed.
4
Select the save rate using [
∧
] and [
∨
], and then press [
]
(Confirm).
The selected save rate is set. If you press [
] (Return), the “Menu”
screen is displayed again.
2
3, 4
All “Control” screen
Setting items
Description
Release
Energy saving operation is not performed.
Maximum
Operate with the highest save rate. It operates at
the save rate set by the remote control.
50%
Operate at 50% save rate.
0%
Operate at thermo-off (Fan).
