Central remote controller
Owner’s Manual
48
-EN
Depending on the range of the area to be cancelled, display and operate the “Control” screen of All, Zone, or Unit.
After cleaning the filter, perform Filter Sign Reset and cancel the Filter Sign displayed on the screen.
If you reset the time, the remaining time to clean the filter is also reset.
If you reset the time when the Filter Sign is not displayed, the remaining time to clean the filter is reset.
●
REQUIREMENT
After cleaning the filter, be sure to perform Filter Sign Reset.
Operation after filter cleaning (Filter Sign Reset)
1
Display the “Control” screen of All, Zone, or Unit. (P.15)
2
Press [ ] (Control).
The “Menu” screen is displayed.
3
Use [
∧
] [
∨
] to select “Filter Sign Reset”, then press [ ]
(Confirm).
The “Admin. Password Entry” screen is displayed.
4
Enter the 4 digit password then press [
] (Confirm).
Press [
<
] [
>
] to select the digit and
[
∧
] [
∨
] to select the number.
The “Filter Sign Reset” screen is displayed.
5
Press [
] (Confirm).
“Reset Complete” is displayed. Press [
] (Return) to return to the
“Menu” screen.
3, 4, 5
2
“Control” screen
