Toshiba SureMark 4610, User Manual

Page: 62 / 82

Code page 865
Character fonts
This section describes font capabilities.
Thermal printing font
There are three font sizes for the resident character set on models TN3 and TN4:
v Font A is 10 dots (wide) × 20 dots (high) with the last 2-dot row used for
descenders (1.25-mm × 2.5-mm character height including descenders, 1.25 mm
× 2.25 mm excluding descenders).
v
Font B is 12 dots (wide) × 24 dots (high) with the last 2-dot row used for
descenders (1.5-mm × 3.0-mm character height including descenders, 1.5 mm ×
2.75 mm excluding descenders).
The number of characters printed per inch depends on the character size, the
inter-character spacing, and the chosen font. For example:
v
17 cpi
⇒
10-dot wide cha 2-dot space (font A)
⇒
48 characters per line
v
15 cpi
⇒
10-dot wide cha 3-dot space (font A)
⇒
44 characters per line
v
12 cpi
⇒
12-dot wide cha 5-dot space (font B)
⇒
34 characters per line
You can choose the character size of four user-defined character sets (code pages)
or two proportional fonts. The parameter ranges for user-defined character sets are:
v
8
≤
dot width
≤
16
v 16 ≤ dot height ≤ 32 (must be a multiple of 2)
Figure B-6. Code Page 865
B-10
4610 SureMark Three– Station Printer: User's Guide