background image

Washington: For information about recycling covered electronic devices in the State of

Washington, go to the Department of Ecology Website at fortress.wa.gov/ecy/recycle/ or

telephone the Washington Department of Ecology at 1-800-Recycle.

Trademarks

The following are trademarks or registered trademarks of Toshiba, Inc. in the United States or

other countries, or both:
Toshiba

The Toshiba logo
The following are trademarks of Toshiba Global Commerce Solutions in the United States or

other countries, or both:
AnyPlace

SureMark

SurePoint

SurePOS

TCxWave

TCxFlight

TCx
The following are trademarks of International Business Machines Corporation in the United

States or other countries, or both:
DB2

DB2 Universal Database

IBM and the IBM logo

PS/2

Wake on LAN

WebSphere
Linux is a trademark of Linus Torvalds in the United States, other countries, or both.
Magellan is a registered trademark of Datalogic Scanning, Inc.
SYMBOL a registered trademark of Symbol Technologies, Inc.
Microsoft, Windows, Windows NT, and the Windows 95 logo are trademarks of Microsoft

Corporation in the United States, other countries, or both.
Celeron and Intel are trademarks of Intel corporation in the United States, or other countries.
Oracle, JVM and Java are registered trademarks of Oracle and/or its affiliates.
Other company, product, or service names may be trademarks or service marks of others.

. Notices

 65

Summary of Contents for SureMark 4610 2CR







































































Reviews: