Toshiba SureMark 4610 1NR, Hardware Manual

Page: 29 / 64

Chapter 3. Installing and configuring the 4610 printer
Installing and configuring the 4610 printer
This section provides safety information and steps on installing your printer.
Before you begin
Before you install your SureMark printer, be sure to read this section and the Safety Information
guide.
Understanding your configuration
Your printer can be set up in either an integrated or distributed configuration. An integrated
configuration is one in which all parts of a system are assembled in one location. A distributed
configuration is one in which you set up parts of the system in different physical locations. In an
integrated configuration, you install the printer on the input/output tray option with the fillers to
contain the printer and display on top of the wide-footprint system units. Other tray options
include mounting the printer on the full-size cash drawer or directly on the counter.
Verify your order
Each order contains the following:
• 4610 unit
• Interface card (RS-232, RS-485, USB, WiFi, or Ethernet)
• Safety manual
• Warranty statement
• Customer options, such as fillers, cables, and power bricks (packaged separately)
Installing the interface card
The interface card (either an RS-232, RS-485, USB, Ethernet, or WiFi interface) is shipped in a
separate box with your printer. Install the interface card as follows:
© Copyright Toshiba Global Commerce Solutions, Inc. 2017
29