Toshiba SureMark 4610 1NR, Hardware Manual

Page: 23 / 64

Device Description
D
Paper door release button
Table 4. Paper supply LED indicator
LED indicator (
B
)
Amber On Paper out
Off Paper sufficient
Blinking Critically low paper supply
Table 5. Printer ready LED indicator
Printer ready (
C
)
Amber Blinking (0.5s
on / 0.5s off)
Station not ready; recoverable error - paper jam, cover open,
cutter jam
Blipping (0.25s
on / 1.75s off)
Offline or hardware failure: Cannot communicate with
paper motion sensor or the thermal printhead; MLC or IFC
problem
Green On Station is ready
Table 6 describes the Ethernet LED indicators that reflect printer status.
Table 6. Ethernet LED indicator
Color State Function
Green
Off - No link
Ethernet Good Link / Activity On - Good link
Blinking - Network activity
Amber Off - 10 MB mode Ethernet 10/100Mb
On - 100 MB mode
Table 7 describes the indicators that reflect the status of the WiFi connection.
Table 7. WiFi LED indicator
Color State Function
Amber Off - No link WiFi connected
On - Link up
Locating the power button
The power button (
A
in Figure 8) for the 4610 Model 1NR is located under the paper door.
Chapter 1. Introducing the 4610 Model 1NR
23