Toshiba Strata DK PC Attendant Console User Manual Download Page 79

Page: 79 / 144

Advanced Calling

Saved Number Redial

Strata DK PC Attendant Console 5/00

Saved Number Redial

Saved Number Redial lets you store a dialed telephone or station number, then redial
that number with the touch of a button.

➤

To save a Number

➤

To redial the Saved Number

➤

Select the

Save Last

user button.

After dialing a number and before hanging up on a
call, the number can be saved for redialing at a later
time.

1. From the Menu Bar,

select Features. Then
select Number
Redial.

2. From the Redial

dialog box, select the
Dial Saved button.

The console dials the saved number.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands