Toshiba Strata DK PC Attendant Console User Manual Download Page 77

Page: 77 / 144

Advanced Calling

Using Door Phones

Strata DK PC Attendant Console 5/00

Using Door Phones

Any of the Door Phones connected to the Strata DK can be called and either be used
for listening or as an intercom to talk with someone at the Door.

1. From the Menu Bar,

select Features. Then
select Door Phones.

2. From the Door

Phones dialog box,
click the button for
the door phone to be
called.

The connection is made without a warning tone to
allow quiet monitoring of activity in the door phone
area.

Note

The labels on these buttons can be changed in
Setup.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands