Toshiba Strata DK PC Attendant Console User Manual Download Page 39

Page: 39 / 144

Console Controls

Timed Reminders

Strata DK PC Attendant Console 5/00

Timed Reminders

Use this feature to send a reminder message to the active call window at a specified
time. To define these messages, see the Set Messages section on Page 83.

1. From the Menu Bar,

select Console, then
Timed Reminders.

2. From the Timed

Reminders dialog
box, enter the time.
Use the 24-hour
format (e.g., 2 p.m. is
14:00).

Leaving the Time box blank deactivates the feature.

3. Select a message

from the drop-down
list.

4. If you want to send

the message daily,
click an (X) in the
Daily box.

5. Repeat Steps 2~4 for

any additional
reminders you wish
to set.

6. Select the OK button.

The message is sent at the selected time.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands