Toshiba Strata DK PC Attendant Console User Manual Download Page 114

Page: 114 / 144

Administration

Password

100

Strata DK PC Attendant Console 5/00

Password

A password is optional to modify all setup codes for the console. For security reasons,
we recommend that you set a password so that changes are not accidentally made.

➤

To change the password

1. From the Menu Bar,

select Setup, then
select Settings.

2. Enter the password, if

required.

The cursor is in the password entry box when a
password is required. If not required, the OK button is
highlighted.

3. Select the OK button

after entering your
password.

The Setup Parameters menu appears.

1. From the Menu Bar,

select Setup, then
select Settings.

The password can be changed from the Password
dialog box.

If there is an existing
password, you must
enter that, then select
OK.

2. Select the Change

button and enter your
new password.

A new dialog box appears requesting your new
password and a confirmation box to ensure it was
entered correctly.

3. Select the second box

and enter the
password again.

A second entry is requested to ensure the code was
entered correctly.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands