Toshiba STRATA CIX, Programming Manual

Page: 65 / 248

V
o
ic
e Mail
Con
fig
uratio
n
Voice Mail Configuration
Language
Strata CIX Voice Mail Programming 01/07
3-25
Change System Language Setting
Important! Prior to performing this procedure, you must set the sys_language_table parameter
to the correct language file.
1. From the eManager menu, click Advanced Configuration > Systems > VM Language. The
Language screen displays (see Figure 3-9 ).
2. Click Configure Language List. A dialog box
displays (shown right).
3. Click Add. The Add Language screen
displays.
4. From the drop-down menu, select the new
language and click OK. The dialog box
reappears.
5. Click Move Down/Move Up > OK. The
Language screen displays.
6. Click Submit. Your changes are saved and the screen remains open. A dialog box displays.
7. Click OK. The changes are added to the voice mail database the next time voice mail service is
shutdown and restarted.
Change Mailbox Language Setting
See “Chains/Groups/Fax” on page 4-31 for information on the required settings.
Edit Prompts
The Edit Prompts function enables you to configure the prompts so that specific languages are used
where needed in the system.
Important! Prior to performing this procedure, you must have a language prompt file saved in
the c:\stratagyes\prompts directory with a filename that defines the language. The
file must be saved with the .VOX extension.
1. From the eManager menu, click Advanced Configuration > Systems > VM Language. The
Language screen displays (see Figure 3-9 ).
2. Highlight a prompt file on the screen and click Edit Prompts. The Confirm Prompt File screen
displays (shown right).
3. Click Add. A dialog box displays.
4. Type in the name of your prompt
file and click OK.
5. You can now move the file up or
down in the list using the Move Up/
Down buttons.
6. Click OK and the new file appears
on the screen.
7. When finished, click Submit.