Toshiba STRATA CIX Programming Manual Download Page 192

Page: 192 / 248

Advanced Integrations and Applications

VPIM Networking

10-16

Strata CIX Voice Mail Programming 01/07

VPIM Operation

Note

VPIM messages can only be sent from mailboxes.

VPIM networking operation consists of the following steps:

Send VPIM Message Using Proxy Mailbox

1. The user logs into his/her mailbox.

2. From the Main Menu, the user presses

for the Send Messages menu.

3. The user enters the Proxy User Agent number as the destination address.

4. The user records the message and presses

to stop recording.

5. The user presses

again to send the message to the specified UA. The message is sent out as an

e-mail through the Internet and saved in the mailbox designated in the

Destination Mailbox

field of the VPIM Proxy User Agent.

Send VPIM Message Using Gateway Mailbox

1. The user logs into his/her mailbox.

2. From the Main Menu, the user presses

for the Send Messages menu.

3. The user enters the Gateway User Agent the mailbox number at the remote server as

the destination address.

4. The user records the message and presses

to stop recording.

5. The user presses

again to send the message to the specified UA. The message is sent out as an

e-mail through the Internet and saved in the designated mailbox at the remote server.

Summary of Contents for STRATA CIX

























































































































































































































































Search results

Summary of Contents for STRATA CIX

Reviews:

Related manuals for STRATA CIX

Brands by name

Popular brands

Toshiba STRATA CIX, Programming Manual

Search results

Summary of Contents for STRATA CIX

Reviews:

Related manuals for STRATA CIX

Brands by name

Popular brands