Toshiba Strata CIX GVPH, Programming Manual, Page: 36 / 184

Configure UADM2 Software
System Parameters
2-14
Strata CIX40 Voice Processing Programming Manual 7/06
security_max_length
Maximum length of the security code that voice processing accepts as a new
security code when a user attempts to change it from a telephone.
Setting this parameter equal to the security_min_length parameter, creates “fixed-
digit” security codes. When fixed-digit security codes are enabled, there is no longer
a requirement for the user to press
#
after entering a security code during log on.
CAUTION! Security_max_length must be equal to, or greater than, the
security_min_length parameter setting.
Possible values: 1~16
Default: 16
security_min_length
Minimum length security code that voice processing accepts as a new security code
when a user attempts to change it from a telephone.
Possible values: 1~16
Default: 1
short_direct_send
What voice processing plays when the Direct Message User ID (usually 998) is
entered followed by the User ID. (The Direct Message User ID is set using the
box_snd parameter.)
True: “You entered” and the User ID’s name recording plays.
False: User ID’s current greeting plays (as if a Ring No Answer was received).
Possible values: true, false
Default: false
shutdown
Designated day and time voice processing performs automatic shutdown for flash
drive maintenance.
The first value between the single quotes is the day of week, where:
0 Sunday4Thursday
1 Monday5Friday
2 Tuesday6Saturday
3 Wednesday-1everyday
The second value between the single quotes is the hour and minute when the
shutdown occurs. Use the 24-hour format with the colon (:) omitted.
Example: 3:30 a.m. on Monday is ’1 330’
Default: ‘2 130’ (Tuesday at 1:30 a.m.)
skip_name_announce
Sets the name announcement at user log on.
True: System skips the name announcement at log-on.
False: System announces the user’s name at log-on.
Possible values: true, false
Default: true
sys_tutorial
Controls whether voice processing Tutorial is processed for the new mailboxes at
log-on.
Note
Mailboxes that are not used for System Tutorial: 411, 982, 983, 990, 991,
994~999.
Possible values: true, false
Default: true – Voice processing processes the Tutorial for new mailboxes at log-
on.
Parameter Description (continued)